It’s not unusual that there’ll be slight scratches or cracked paint on your vehicle. Stones and pebbles can rebound on the car’s surface. Weather conditions may produce surface imperfections on your car’s hood. Let’s be real; accidents can happen at any time. If the area isn’t more substantial than the size of a pencil eraser, there is no need for a professional paint job. The only thing you’ll need is to learn how to use touch up paint on the damaged area.
Here’s how to touch up paint to your car properly:

vx check engine oil's dipstick

Get the Correct Colour of Touch Up Paint for Your Vehicle

Look for a touch-up paint that matches the same color of your vehicle before you start touching up your car or truck. Choosing the right color is quite essential. You don’t want to use paint, which has a lighter or darker shade than the one in your vehicle. They have to match. The best automotive touch-up paint should always be the same as the color of the car it is going to be applied.

Check the VIN of your vehicle, if you can’t find the color code. Use this information to seek out the color code of your car via online resources. Make sure you enter the brand and year model in the search parameters of these tools that are online. The provided information will help give a more exact color code for your car.

Bring this information to your auto parts shop and get the right touch up paint for your car. Do not get paint that doesn’t have the exact color code as your car, as it will mess up your car’s color.

Get Ready the Area You Are Going to Touch Up

Before starting with the procedure of how to touch up car paint, then you’ll have to prepare the surface that is affected. Wash your car with water and soap, recommended using automotive soap. It would be best to wash the entire vehicle, so it is possible to identify any other scratch that will need to be touch up. Washing the car may help decrease, if not eliminate, the possibility of getting dirt and dirt from the new paint. Be sure to dry the region. Touch up paint won’t adhere to a surface that is moist or wet.

Remove any visible rust on the surface. Use sandpaper to remove areas that are rusted. It’s essential to remove any rusted areas to help minimize corrosion. It has been often waxed on by the car’s surface.

The car’s outer surface often has wax on it. You should remove this using a wax and grease remover so that touch up paint can adhere. To ease in removing any loose paint, sand the affected area with 220-grit sandpaper. Sanding will also help paint primer to stick to the car’s surface.

Wash the affected area with water and allow it to dry before proceeding to the next steps thoroughly. Washing will help provide a cleaner, debris-free surface for you to apply the touch-up paint.

vx check engine oil's dipstick

Apply the Paint Primer

A paint-primer can help to protect your car’s metal surface from rusting. Also, touch-up paint can adhere to the treated surface. However, It is not required to apply paint primer if the scratch doesn’t go deep down to the bare metal of the car. You can bypass the priming of the surface if the scratch is superficial. You should always apply the paint primer if the area has an exposed metal surface.

There are vehicle owners that apply a coat of rust-arrestor before they use the primer. Rus-arrestors are perfect for surfaces that have rusted. Sanding and washing the region will remove the rust. However, there isn’t any guarantee that the surrounding areas aren’t yet affected by the present rust. Thus by applying rust-arrestor, it can help prevent corrosion from spreading. If you would like to utilize a rust-arrestor or rust inhibitor, be sure to use it before using the paint-primer.

In applying the paint-primer, it is most useful to use a tiny brush with a bristle head. Some people use a matchstick to assist them in applying as small paint-primer possible. Generally, a drop of primer is sufficient to cover the affected area. Be very careful not to get the paint-primer to the original paint of the car. Wipe off the paint-primer simultaneously, if this happens. Allow the paint-primer to dry completely before proceeding to the next step.

Steps on Applying the Touch Up Paint

It’s often necessary to test the touch-up paint on a hidden section of the vehicle. It would be best if you made sure that the color of the touch-up paint matches the color of your car. It’s crucial to remember that some touch-up paint producers will not provide the best possible quality as the original car’s color. You may have the ideal color code; however, they are cases of which touch-up paint reacts with the car’s original paint color.

It is vital to make a trial touch-up before the actual application. Try applying a small quantity of the touch-up color on the lip below the car door. Make sure that you clean the surface so that dirt, dust, and grime will not get on the paintbrush. The clean paintbrush will also let you earn a more accurate assessment of the paint application. If you are content with the results, you can then proceed to the use of the touch-up paint on the affected location.

Use a tiny brush with a pointed bristle. Apply one drop of the touch-up paint and disperse it throughout the surface of the affected area. It may help in avoiding runoffs, which may ruin the finish of your vehicle.

You will have to apply for about 2 to 3 layers of the base jacket. Wait at least an hour for the touch-up paint to dry before applying another coat. Examine the paint manufacturer details for the recommended waiting period in between programs. Drying one layer at a time will help prevent smearing when the following layer gets implemented.

It’s okay to apply the touch-up paint a bit beyond the affected area. You will still be trimming by sanding it off it at the later phases of the touch-up process.

Once you have applied the touch-up paint, then leave your car for about 24 hours to ensure the paint application cures correctly.

vx check engine oil's dipstick

Last Step: Finalize the Surface

The last step in the procedure of how to use touch-up paint entails smoothening the area and the application of a clear coat.

As mentioned previously, it is okay for the touch-up painted area to be applied a little beyond the affected area. You’ll be sanding this off so that it becomes flush with the rest of the surface. You may want three different grit sizes of sandpaper for this particular job. You may start with 1000-grit sandpaper to help smoothen out just as much of the painted surface as possible. Do it in a slow and gentle approach. Bear in mind not to apply too much pressure as you might accidentally sanding the surrounding areas.

Once the surface is practically at par with its surroundings, use 2000-grit sandpaper to continue with the sanding procedure. End up this with all the 3000-grit sandpaper. It will make a very smooth surface but with sufficient microscopic pores’ for the clear coat to adhere to. Make sure that the sanding process level the touch-up paint with it’s surrounding area. Clean the surface to remove any dust from the sanding procedure.

Apply the clear coat with a tiny paintbrush. Use smooth brush strokes to apply the transparent coating. It is much better to apply several layers of thin clear coats than using a single thick coat. Make sure to wait about half an hour in between the application of the clear coat. However, do verify the recommendations of the clear coat manufacturer. Some will recommend the use of several layers. Others are going to urge that once is sufficient.

Smoothen the surface using 3000-grit sandpaper. It may help blend the clear coat with the rest of the clear coat of your car. It also ensures you’ve got a smooth surface. Clean up the surface and apply wax. Buff it nicely, and you should be able to give your car that brand new appearance.

Applying touch-up paint is almost similar to painting your car. It entails preparing the vehicle, employing a primer, utilizing the car’s paint, and ending it off with a clear coat. The only distinction is that you are working in a minimal area.

Like The Article?